A 183-page guide for experienced FreeCAD users on building parametric models that other people can configure, manufacture and use with confidence.
Who it is for
The guide is for FreeCAD users who want other people to configure, manufacture and use their parametric models with reasonable confidence. It is aimed primarily at engineers and technically experienced creators of functional parts made by extrusion-based polymer additive manufacturing, such as FDM or FFF.
It assumes practical experience with FreeCAD: sketches and constraints, expressions and aliases, Bodies and features, and the Spreadsheet workbench.
Main topics
- Purpose and engineering position
- Define the design boundary
- Build the parameter interface
- Build a robust FreeCAD model
- Encode manufacturing in the model
- Verify, control and release
- Handover, platforms and design-system thinking
Appendices cover a minimum checklist for simple shared parts, the Spreadsheet control layer in practice, configuration tables, a worked bit-holder example, an advanced FreeCAD toolbox and parametric controls outside the Spreadsheet.
What it does not cover
- It is not a beginner's FreeCAD tutorial and does not give click-by-click instructions for basic operations.
- It is not a slicer manual or a catalogue of universal print settings, and it does not replace printer- and material-specific validation.
- A model that recomputes without errors is not thereby suitable for manufacture or use; the guide explains what further evidence is needed.
Version and FreeCAD baseline
The guide is versioned against the FreeCAD release on which its guidance has been verified. Version 1.1.2-01 is the first revision for FreeCAD 1.1.2.
Terms of use
© 2026 Magimo. All rights reserved. The guide is made available free of charge. It may be used in normal engineering practice, including for commercial purposes, provided that the copyright notice and the other notices in the document are retained. It may not be sold, licensed or otherwise made available for payment, in whole or in part. It may be shared only in its entirety and unmodified; short sections may be quoted with credit and a link to the official source. See the document itself for the full terms and the disclaimer.
Feedback
Corrections, suggestions and test results are welcome at magimo.freecad@magimo.eu.